# Project #11638 - 3 sets of data input

Assignment 1 (13%):

In this assignment, you will design a program to perform the following task:

Calculate the usable area in square feet of house.  Assume that the house has a maximum of four rooms, and that each room is rectangular.

Before attempting this exercise, be sure you have completed all of chapter 2 and course module readings, participated in the weekly conferences, and thoroughly understand the examples throughout the chapter.   There are 3 main components of your submission including the problem analysis, program design and documentation, and sample test data.

1.   Using a similar approach as example 2.3 (textbook page 75): “Finding the Sale Price of Items in a Department Store”, provide your analysis for the following problem statement:

You need to write a program that will calculate the number of square feet (living space) in a 4-room house. Your analysis should be clearly written and demonstrate your thought process and steps used to analyze the problem. Be sure to include what is the required output? What is the necessary input and how you will obtain the required output from the given input? Also, include your variable names and definitions. Be sure to describe the necessary formulas and sample calculations that might be needed.

2.   Using a similar approach as the example provided in section 2.2(textbook page 78) for “The Sale Price Program continued”, provide your program design for the program you analyzed for calculating the number of square feet in a house.  Be sure to describe the fundamental tasks needed to solve the problem so you can use a modular design.  Provide pseudocode of your overall design that includes the Main module and the order of the module calls (see page 82 for an example). Finally, list all of your pseudocode for each module (See example 2.6 on page 83 as an example).

Include header and step comments in your pseudocode, using a similar approach as the example provided in section 2.3 (textbook page 86). See example 2.8 on pages 88).

3.   Prepare at least 3 sets of input data (Test data) along with their expected output for testing your program.  Your test data can be presented in the form of a table as follows (note: feel free to adapt to your design):

Example application test data:

 Input: Room length and width (in feet) Expected output: Total square footage of house (in square feet) Room1: length=10, width=14; Room 2: length=9, width=10; Room 3: length=12, width=12; 374 Enter your room dimensions here Enter your total square feet Enter your room dimensions here Enter your total square feet

Submission requirements:

Your completed assignment should be saved as Word document and submitted to your WebTycho assignment area no later than the due date listed in the syllabus. Your document should be neat, well-written with minimal grammatical and spelling errors. Your name should be clearly listed on the first page along with the class/section, professor and due date. Your document should contain page numbers at the bottom of each page. Single or double space line formatting is acceptable.

You should name the file yournamehw1.docx (or yournamehw1.doc). So if my name was Julie Smith, I would name my document juliesmithhw1.docx.

An example HW1.doc template file containing the required sections is included in the available resources. You should use this document to start your writing and fill in all of the details required.

 Subject Computer Due By (Pacific Time) 09/01/2013 11:00 pm
TutorRating
pallavi

Chat Now!

out of 1971 reviews
amosmm

Chat Now!

out of 766 reviews
PhyzKyd

Chat Now!

out of 1164 reviews
rajdeep77

Chat Now!

out of 721 reviews
sctys

Chat Now!

out of 1600 reviews

Chat Now!

out of 770 reviews
topnotcher

Chat Now!

out of 766 reviews
XXXIAO

Chat Now!

out of 680 reviews